Your technician should discuss with you the adhesive used and the time it takes for it to properly bond the auto glass to your vehicle. This lets you make an informed decision as to when you feel the car is automobile windshield chip repair safe to drive.
There are no excuses for this kind of issue, because it is very easy to look for a specialist who can do the work. There are many options in finding a good specialist. You can use classified ads in the newspaper and in modern times you can always use the internet to find a company that can do the work for you. The price for this kind of job is very affordable. You have a wide array of choices. You must always remember that the auto glass is as important as the engine or body of a vehicle because it will also give you safety when driving.
Driving the car immediately after a windshield repair is not something you can do. There is a time period that should be allowed to make sure that the window has settled and dried. The warmer weather allows for the adhesives to dry quickly. However, the colder weather increases the time that is needed before you resume driving. Taking the time to wait for the adhesives to be at full strength could mean the difference between life and death or an accident that leaves you maimed.
Use your defroster on high. Extremes in temperature are never a good thing for a cracked or damaged windshield. If you live in an area where you are required to use your defroster regularly, gently warm up the car over a period of time. It's also best to find a mobile windshield repair company that can do your repairs as soon as possible.
Still no big deal? In some states it's illegal to drive with a crack in the windshield that is in the driver's line of sight. In other states it's illegal to drive with a cracked windshield at all. I'd call that a big deal.
To further strengthen the windshield, the auto glass is subjected to a tempering phase. The sheet is heated to a temperature of 1565 degrees Fahrenheit or 850 degrees Celsius. It is then subjected to blasts of cold air. A piece of PVB plastic is sandwiched between two pieces of auto glass. The sandwich is heated inside an autoclave. This bonds the components together tightly and removes any trapped air.